Latest additions
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Latest additions
Let me know what the quality of the CDL is like Philipp, it’s sat on my fantasy shopping lists a lot but I’ve never hit buy....
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
Re: Latest additions
It certainy looks good. Takoms's M3s are generally rather well done and accurate. I've read Takom's link&lenght Sherman tracks don't fit quite well on the running gear. Speaking of which, the American CDLs were fitted with later VVSS units. I happen to have a spare Asuka set, so it's not an issue for me
Philipp
Philipp
Completed Campaigns:
- Shawn Ramsey
- Senior Site Contributor.....
- Posts: 1987
- Joined: 20 Jul 2014, 00:26
- Shawn Ramsey
- Senior Site Contributor.....
- Posts: 1987
- Joined: 20 Jul 2014, 00:26
Re: Latest additions
These arrived a couple of weeks ago.
The AFV kit is a new release.
Shawn
The AFV kit is a new release.
Shawn
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Latest additions
Nice ones Shawn
I have seen the MJ resin tool clamps advertised, what do they look like in the "flesh"?
They must be easier to use than etch?
More figures and a motor cycle crew too
Have fun
Steve H
I have seen the MJ resin tool clamps advertised, what do they look like in the "flesh"?
They must be easier to use than etch?
More figures and a motor cycle crew too
Have fun
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Latest additions
Okay, I've found a probably crappy (it has lots of flash - already seen that much on the photos... ) kit for the "mini-low-budget-GB" .
As Shawn said in Philipp's thread on the topic:
Haven't build a plane since... er... it's probably rather significantly over two decades...
This is a Polikarpov Po-2 for the simple reason... err... here's the reason =>
Night Witches!
It even comes with Guards decals which are incredibly useful since the 588th Night Bomber Regiment subsequently became the 46th "Taman" Guards Night Bomber Aviation Regiment.
Best regards
Raoul G. Kunz
As Shawn said in Philipp's thread on the topic:
Yes we are...Another aircraft. We are all going mad with the COVID 19 pandemic.
Haven't build a plane since... er... it's probably rather significantly over two decades...
This is a Polikarpov Po-2 for the simple reason... err... here's the reason =>
Night Witches!
It even comes with Guards decals which are incredibly useful since the 588th Night Bomber Regiment subsequently became the 46th "Taman" Guards Night Bomber Aviation Regiment.
Best regards
Raoul G. Kunz
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
- Matt Parvis
- Site Contributor..
- Posts: 312
- Joined: 20 Jul 2014, 01:33
- Location: North of Washington DC
Re: Latest additions
I suspect that build will be... interesting.
Matt
Matt
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Latest additions
You suspect, I dread !
Best regards
Raoul G. Kunz
Best regards
Raoul G. Kunz
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Latest additions
This is the reason I bought the Tamiya Chieftain,
Only took 3mths by airmail from Scotland! COVID has really screwed up the post. Its almost entirely a resin kit, the first line of the instructions tells you to "build the suspension and running gear of the Tamiya kit then discard the rest..!" after that it gets you to amputate the front 2cm of the hull with a razor saw.
Anyone want 95% of a Tamiya Cheiftain Mk.5 kit?
Only took 3mths by airmail from Scotland! COVID has really screwed up the post. Its almost entirely a resin kit, the first line of the instructions tells you to "build the suspension and running gear of the Tamiya kit then discard the rest..!" after that it gets you to amputate the front 2cm of the hull with a razor saw.
Anyone want 95% of a Tamiya Cheiftain Mk.5 kit?
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
- Mark Aldrich
- Senior Site Contributor.....
- Posts: 1227
- Joined: 21 Aug 2014, 21:13
- Location: Puyallup, WA
Re: Latest additions
Now that I am back at work, I ordered myself a few things that I felt I needed.
Cry Havoc and let slip the Dogs of War
TreadHead is NOT an ugly word
Completed Campaigns:
TreadHead is NOT an ugly word
Completed Campaigns: