Dragon 1:35 Pz I 200 mm Flak 38 with PE
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Dragon 1:35 Pz I 200 mm Flak 38 with PE
Hi Shawn
All my soldering gear is buried somewhere in the attic, so it was all CE.
It would be tougher soldered, but it will be sometime before I can crawl around on my new bionic knees and find the soldering stuff!!
Still more crazy minute PE still to do, its an poor excuse to do the PE rather than get my brushes out and paint!
Your figures have inspired me to try heads again.................................soon?
Thanks for popping by
Steve H
All my soldering gear is buried somewhere in the attic, so it was all CE.
It would be tougher soldered, but it will be sometime before I can crawl around on my new bionic knees and find the soldering stuff!!
Still more crazy minute PE still to do, its an poor excuse to do the PE rather than get my brushes out and paint!
Your figures have inspired me to try heads again.................................soon?
Thanks for popping by
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Dragon 1:35 Pz I 200 mm Flak 38 with PE
!
Your ammo boxes look stunning Steve!
Probably won't be going so intensely in the etch direction for a while, but you never know... the last two times I wanted to do something simple It went all nuts... so...
Best regards
Raoul G. Kunz
looking forward to new Steve heads - I still have a couple stunning ones looking for a proper body
Your ammo boxes look stunning Steve!
Probably won't be going so intensely in the etch direction for a while, but you never know... the last two times I wanted to do something simple It went all nuts... so...
Best regards
Raoul G. Kunz
looking forward to new Steve heads - I still have a couple stunning ones looking for a proper body
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
Re: Dragon 1:35 Pz I 200 mm Flak 38 with PE
Fully agree, these ammo boxes are amazing!
No comparison to what my silly old kit provides
Philipp
No comparison to what my silly old kit provides
Philipp
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Dragon 1:35 Pz I 200 mm Flak 38 with PE
Thanks chaps
I have worked to a pause with this for now
Working side shields
Though I will lock them down with super glue for painting
and all the other stuff
Just the Flak 30 left, but time to paint some heads and have a change of pace.
I still have a dozen heads I put aside for you Raoul, 3 years ago! they are on the bench now
I hope to AB this one and a Stug III B I have completed, once the snow lifts and the weather warms up,
sometime this Spring LOL
More soon?
Steve H
I have worked to a pause with this for now
Working side shields
Though I will lock them down with super glue for painting
and all the other stuff
Just the Flak 30 left, but time to paint some heads and have a change of pace.
I still have a dozen heads I put aside for you Raoul, 3 years ago! they are on the bench now
I hope to AB this one and a Stug III B I have completed, once the snow lifts and the weather warms up,
sometime this Spring LOL
More soon?
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Dragon 1:35 Pz I 200 mm Flak 38 with PE
Ohhhhhhhh this looks magnificent Steve!
The ammo boxes specifically are most awesome!
Ohhhh - I feel honoured!
Best regards
Raoul G. Kunz
The ammo boxes specifically are most awesome!
Ohhhh - I feel honoured!
Best regards
Raoul G. Kunz
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
- Vincent Power
- Senior Site Contributor.....
- Posts: 2641
- Joined: 31 Jul 2014, 23:49
- Location: Melbourne Australia
Re: Dragon 1:35 Pz I 200 mm Flak 38 with PE
Most impressive PE work Steve. Looks like you are on a roll now.
Vincent
Vincent
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Dragon 1:35 Pz I 200 mm Flak 38 with PE
Opps its been awhile, but thanks for the positive comments Raoul, Vincent
I do prefer to solder when I can!
An update as yesterday was cooler so out came the AB
The trailer in a slightly different PG
Together
and a Black & White edit which shows why the grey/brown camo was missed for soooo long!
The remaining modulation will be by brush as this is currently the limit of my ultra low pressure fine needle AB skills, but it is getting better!
More soon?
Though I now need to build the Flak 30, I was hoping to have the crew figures, but available nothing yet
Regards
Steve H
I do prefer to solder when I can!
An update as yesterday was cooler so out came the AB
The trailer in a slightly different PG
Together
and a Black & White edit which shows why the grey/brown camo was missed for soooo long!
The remaining modulation will be by brush as this is currently the limit of my ultra low pressure fine needle AB skills, but it is getting better!
More soon?
Though I now need to build the Flak 30, I was hoping to have the crew figures, but available nothing yet
Regards
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Shawn Ramsey
- Senior Site Contributor.....
- Posts: 1987
- Joined: 20 Jul 2014, 00:26
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Dragon 1:35 Pz I 200 mm Flak 38 with PE
Nice work Steve. The grey/brown camo seems so obvious now when you look at B&W photos, but I can see why it was missed!
On the home stretch now
On the home stretch now
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
- Olivier Carneau
- Senior Site Contributor.....
- Posts: 1178
- Joined: 24 Jul 2014, 09:40
- Location: Corrèze, Southern France
- Contact:
Re: Dragon 1:35 Pz I 200 mm Flak 38 with PE
Nice job on the camo. I'm eager to see it with the AA gun installed.