Tamiya 1:35 35197 StuH 42
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Tamiya 1:35 35197 StuH 42
Evening one and all
Why am I building this one as part of a retro GB?
Shimmery time travelling effect, sorry Raoul, done this one before
I started modelling at aged 9, one rainy Saturday afternoon, my 14 year old uncle came round with an Airfix Arado sea plane, and you can still get them!
Built and painted in one afternoon, and I was hooked.
I followed a weekly eclectic building plan, of anything I could afford on 3 shillings pocket money, 15p by today's money, and a King's ransom in 1969, I was a lucky chap
I built and occasionally painted but built and built, and one day, my 12th birthday, I think, it snowed heavily and I walked 4 miles home from school in 6 inches of snow and a minor blizzard, my birthday presents included this, and my future was locked and loaded for ever
and you can still get one, even now
I did progress to the 1:35 kits as a teenager, and still have some of my 1970's builds, well 2
Be gentle I was only 13 or 14
.
The real step forward was a 1:35 Tamiya Stug III G, which isn't available as such
But the next best thing, and still pre, 2000 at 1995 is going to be this
I did contemplate this but perhaps not?
I could even recreate the original Tamiya No. 14 figures with this Dragon set, even the poses are similar, well nearly
And what next you may ask?
Time for some research, just the ticket
And my book collecting OCD clicks into place
I will definitely need this
waffle zimmerit tool
I will, one day, have to do Alkett zimmerit, but it isn't easy without one, using PE zimmerit isn't always the best way forward.
Does anyone know where to buy one at a reasonable price, Firestorm don't seem to have any?
My internet search has been fruitless, so if anyone has anything useful to advise?
The Tamiya kit is reviewed as a really nice build,
Tamiya 35197 Stug III G
build video
a real shake and bake kit, no need to worry about tracks with the schurzen.
I have ordered an RB barrel, one of each size too
More tomorrow
Steve H
Why am I building this one as part of a retro GB?
Shimmery time travelling effect, sorry Raoul, done this one before
I started modelling at aged 9, one rainy Saturday afternoon, my 14 year old uncle came round with an Airfix Arado sea plane, and you can still get them!
Built and painted in one afternoon, and I was hooked.
I followed a weekly eclectic building plan, of anything I could afford on 3 shillings pocket money, 15p by today's money, and a King's ransom in 1969, I was a lucky chap
I built and occasionally painted but built and built, and one day, my 12th birthday, I think, it snowed heavily and I walked 4 miles home from school in 6 inches of snow and a minor blizzard, my birthday presents included this, and my future was locked and loaded for ever
and you can still get one, even now
I did progress to the 1:35 kits as a teenager, and still have some of my 1970's builds, well 2
Be gentle I was only 13 or 14
.
The real step forward was a 1:35 Tamiya Stug III G, which isn't available as such
But the next best thing, and still pre, 2000 at 1995 is going to be this
I did contemplate this but perhaps not?
I could even recreate the original Tamiya No. 14 figures with this Dragon set, even the poses are similar, well nearly
And what next you may ask?
Time for some research, just the ticket
And my book collecting OCD clicks into place
I will definitely need this
waffle zimmerit tool
I will, one day, have to do Alkett zimmerit, but it isn't easy without one, using PE zimmerit isn't always the best way forward.
Does anyone know where to buy one at a reasonable price, Firestorm don't seem to have any?
My internet search has been fruitless, so if anyone has anything useful to advise?
The Tamiya kit is reviewed as a really nice build,
Tamiya 35197 Stug III G
build video
a real shake and bake kit, no need to worry about tracks with the schurzen.
I have ordered an RB barrel, one of each size too
More tomorrow
Steve H
Last edited by Steve Hutchinson on 02 Aug 2018, 17:43, edited 1 time in total.
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Tamiya 1:35 35197 Stug III G
Ohhhhhhh! Shiny! (ever watched Firefly?)
It's still a great kit generally speaking. It has it's minor flaws, but you have the right references on hand .
I think at one point in the not too distant past I've built one and done some of the corrections....okay, ~45min of research into the forum logs reveal that it has to have been a long time ago since I couldn't find anything . Doesn't feel like it was back in the modelarmour days but it would appear it was way back... or maybe it`s hiding in some unexpected place here ... I could swear it was after my move in '14...
No need really to worry about the tracks, even if you don't mount skirts - the Tamiya later pattern early ( ) 40cm tracks with solid guide teeth are perfectly well detailed and track sag is generally overrated, once in movement German tracks are usually tout.
...this is really dangerous... the lure of the StuG side is strong... I still have at least one Tamiya III G as well as their Finnish version sitting among my stash here... no...need to do T-35!
Looking forward to seeing this build!
Best regards
Raoul G. Kunz
It's still a great kit generally speaking. It has it's minor flaws, but you have the right references on hand .
I think at one point in the not too distant past I've built one and done some of the corrections....okay, ~45min of research into the forum logs reveal that it has to have been a long time ago since I couldn't find anything . Doesn't feel like it was back in the modelarmour days but it would appear it was way back... or maybe it`s hiding in some unexpected place here ... I could swear it was after my move in '14...
No need really to worry about the tracks, even if you don't mount skirts - the Tamiya later pattern early ( ) 40cm tracks with solid guide teeth are perfectly well detailed and track sag is generally overrated, once in movement German tracks are usually tout.
...this is really dangerous... the lure of the StuG side is strong... I still have at least one Tamiya III G as well as their Finnish version sitting among my stash here... no...need to do T-35!
Looking forward to seeing this build!
Best regards
Raoul G. Kunz
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Tamiya 1:35 35197 Stug III G
Absolutely Raoul
Space cowboys,
All assistance welcome, and I have a little update
Tamiya really are shake and bake kits
Just a few hours between all the other Easter Sunday stuff
Bottom 1/2 done, now its time to research what to do with the top
More soon
Steve H
Space cowboys,
All assistance welcome, and I have a little update
Tamiya really are shake and bake kits
Just a few hours between all the other Easter Sunday stuff
Bottom 1/2 done, now its time to research what to do with the top
More soon
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
Re: Tamiya 1:35 35197 Stug III G
Nice start Steve
I'm sure Raoul can provide you with a ton of reference photos, but how about this for a start?
Philipp
I'm sure Raoul can provide you with a ton of reference photos, but how about this for a start?
Philipp
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Tamiya 1:35 35197 Stug III G
Thanks Philipp,
Love the field mod schirzen
This is what I am hoping to build, to keep it simple and minimal add on's
The Tamiya Stug III G 35197 is almost there and it does mean I can keep it to a single colour as AB work is not in my immediate future.
Another one from the rear
The blanking domed cover for the rear towing pintle seems to indicate a Pz III L or M conversion?
The bullet splash plate is not off center, so its an either/or?
After a day of research, there is so much variation with just the StuH 42
The Tamiya schirzen are pretty cool too, with 6 pieces
I think I am going in the right direction, but other than thinning fenders and preping all the tools with undercuts on thick clamps, I shall hold off installing the casemate until the RB 10.5 barrel arrives.
I have attached the pintle blanking plate but it can come off easily enough.
I still haven't found the firestorm Waffle zimmerit tool anywhere, or even an alternative
I have ordered the Eduard Waffle zimmerit set, for the next build, as I can feel more Alkett 10.5 StuH 42 builds in the very near future, the Revell kit will be a good base for the next one, and with all the references I have found there are several others, without even getting into all the field mods
This is an interesting one
no zimmerit?
The Tamiya base kit witht eh bolt on front end plating?
Any input, advise, better options, moral support or don't be daft, all accepted
Regards
Steve H
All photos are for discussion only
Love the field mod schirzen
This is what I am hoping to build, to keep it simple and minimal add on's
The Tamiya Stug III G 35197 is almost there and it does mean I can keep it to a single colour as AB work is not in my immediate future.
Another one from the rear
The blanking domed cover for the rear towing pintle seems to indicate a Pz III L or M conversion?
The bullet splash plate is not off center, so its an either/or?
After a day of research, there is so much variation with just the StuH 42
The Tamiya schirzen are pretty cool too, with 6 pieces
I think I am going in the right direction, but other than thinning fenders and preping all the tools with undercuts on thick clamps, I shall hold off installing the casemate until the RB 10.5 barrel arrives.
I have attached the pintle blanking plate but it can come off easily enough.
I still haven't found the firestorm Waffle zimmerit tool anywhere, or even an alternative
I have ordered the Eduard Waffle zimmerit set, for the next build, as I can feel more Alkett 10.5 StuH 42 builds in the very near future, the Revell kit will be a good base for the next one, and with all the references I have found there are several others, without even getting into all the field mods
This is an interesting one
no zimmerit?
The Tamiya base kit witht eh bolt on front end plating?
Any input, advise, better options, moral support or don't be daft, all accepted
Regards
Steve H
All photos are for discussion only
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
Re: Tamiya 1:35 35197 Stug III G
Looks like the last one is your best option as far as the kit is concerned. No Zimmerit, no camo scheme, bolted applique armour. No. 55 is nice too, but it has the 80mm hull. The defining feature for recycled Panzer III hulls are the brake inspection hatches, it looks like 55 had the standard Stug version.
The whitewashed StuH is one of the prototypes based on a StuG Ausf. F. The old Imperial Dragon kit had all the parts you need.
I've been searching for a waffle Zimmerit tool for years, it seems they are all out of production. I'm considering to make one myself, maybe using square plastic rods glued together into a suitably sized bundle.
Philipp
The whitewashed StuH is one of the prototypes based on a StuG Ausf. F. The old Imperial Dragon kit had all the parts you need.
I've been searching for a waffle Zimmerit tool for years, it seems they are all out of production. I'm considering to make one myself, maybe using square plastic rods glued together into a suitably sized bundle.
Philipp
Completed Campaigns:
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Tamiya 1:35 35197 Stug III G
Nothing to add in regards to the Panzer III option - maybe that the III conversions often, though not always, also tend to feature the proper Panzer III track guards with hinged moveable flaps in the front in addition to the inspection hatches.
I'd need to dig it up, but I do have a Waffel pattern Zimmerit stamp, if you need it I can dig it up and send it over, I certainly won't need it in the near future.
Though I don't remember who made it which would be all kinds of useful ...
Best regards
Raoul G. Kunz
I'd need to dig it up, but I do have a Waffel pattern Zimmerit stamp, if you need it I can dig it up and send it over, I certainly won't need it in the near future.
Though I don't remember who made it which would be all kinds of useful ...
Best regards
Raoul G. Kunz
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
Re: Tamiya 1:35 35197 Stug III G
You mean the Zimmerit stamp I've been asking about for the last ~5 years?
Philipp
Philipp
Completed Campaigns:
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Tamiya 1:35 35197 Stug III G
....yes... I just need to find it, it's here...
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Tamiya 1:35 35197 Stug III G
That would be superb, Raoul
If at all possible, WHEN you find the waffle tool
Get some 3D copies done.
I'll take 2, an heir and spare.
Just let me know how much and P&P too.
Best if luck with your hunt
Philipp might like some too
Regards
Steve H
If at all possible, WHEN you find the waffle tool
Get some 3D copies done.
I'll take 2, an heir and spare.
Just let me know how much and P&P too.
Best if luck with your hunt
Philipp might like some too
Regards
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns: