Tamiya 1:35 35197 StuH 42
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Tamiya 1:35 35197 Stug III G
Will do my best on the weekend - it may very well be in a certain kit box... I really hope, I know for certain that I saw it once after the move, so it's not been left in the old house at least - and now, I haven't promised the same thing to two people at the same time, it does have multiples of the same pattern, just once in a pattern and once as a stand-alone ,
...had I known that there wouldn't be one for years to come I'd have bought a ton and stored them .
I don't even remember if I used it even once...
Best regards
Raoul G. Kunz
...had I known that there wouldn't be one for years to come I'd have bought a ton and stored them .
I don't even remember if I used it even once...
Best regards
Raoul G. Kunz
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Tamiya 1:35 35197 Stug III G
Thanks Raoul
Find it or not I do appreciate your trying, and 3D printing more is defiantly a good option moving forward
I purchased these, and scratching a waffle zimmerit tool could be possible, Philipp, with a 0.5mm square rod stock and some ingenuity.
I have used the 10.5 cm RB barrel, which is light years ahead of any 2 piece plastic kit barrel, though there is a trick to the assembly of the turned barrel with photo etched parts.
The RB barrels are the economy versions, they might need a little trimming but they have no distructions, but after an interweb search I stumbled onto the secret, all the distructions are available on the Armourscale website
10.5cm assembly instructions
Problem solved, website bookmarked,
So, progress to date and the assembled barrel, she really is a beautiful thing
I shall go with ""55"" from Achtung Panzer book, Stug III and Stug IV and variants and the additional welding seams to spruce up the armour plating.
and the result
and before you know it, its all finished
This is the 2nd Stug III, I have build, all I need to do is paint them both!
Back to the Sturm Tiger prototype, whilst the painting problem is being addressed.
I shall try and paint the 2 tamiya figures that come with the kit, as a kick start to my figure/face painting, though I will change the heads for hornet
More soon?
Steve H
Find it or not I do appreciate your trying, and 3D printing more is defiantly a good option moving forward
I purchased these, and scratching a waffle zimmerit tool could be possible, Philipp, with a 0.5mm square rod stock and some ingenuity.
I have used the 10.5 cm RB barrel, which is light years ahead of any 2 piece plastic kit barrel, though there is a trick to the assembly of the turned barrel with photo etched parts.
The RB barrels are the economy versions, they might need a little trimming but they have no distructions, but after an interweb search I stumbled onto the secret, all the distructions are available on the Armourscale website
10.5cm assembly instructions
Problem solved, website bookmarked,
So, progress to date and the assembled barrel, she really is a beautiful thing
I shall go with ""55"" from Achtung Panzer book, Stug III and Stug IV and variants and the additional welding seams to spruce up the armour plating.
and the result
and before you know it, its all finished
This is the 2nd Stug III, I have build, all I need to do is paint them both!
Back to the Sturm Tiger prototype, whilst the painting problem is being addressed.
I shall try and paint the 2 tamiya figures that come with the kit, as a kick start to my figure/face painting, though I will change the heads for hornet
More soon?
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Tamiya 1:35 35197 Stug III G
Certainly an impressive gun! What goes above the gun mount, is there another armored panel to go there?
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Tamiya 1:35 35197 Stug III G
Hi Adam
There is, but as I haven't secured the gun and mount, it can go in after the primer coat.
Too damp for primer today, its been raining for 3 days here, and no heat or light due to no power in the garage..
Time to finish the Sturmtiger and keep building until the weather changes and gets warmer and dryer
More later?
Steve H
There is, but as I haven't secured the gun and mount, it can go in after the primer coat.
Too damp for primer today, its been raining for 3 days here, and no heat or light due to no power in the garage..
Time to finish the Sturmtiger and keep building until the weather changes and gets warmer and dryer
More later?
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
Re: Tamiya 1:35 35197 Stug III G
That was fast
Good to know building this with an 80mm hull isn't too difficult either. Makes a whole lot more versions possible with this kit.
Philipp
Good to know building this with an 80mm hull isn't too difficult either. Makes a whole lot more versions possible with this kit.
Philipp
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Tamiya 1:35 35197 Stug III G
Very versatile with lots of options, Philipp
I think I need to build a Dragon Stug III G to figure out if an over engineered kit is worth the effort
as the Tamiya kit really does just fall together
Or.....................................................
We could ask our local Stug Meister
I would build another 10.5 or 2, as there are some really good references for different local field mods which would make great builds.
Primer soon, hopefully!
Regards
Steve H
I think I need to build a Dragon Stug III G to figure out if an over engineered kit is worth the effort
as the Tamiya kit really does just fall together
Or.....................................................
We could ask our local Stug Meister
I would build another 10.5 or 2, as there are some really good references for different local field mods which would make great builds.
Primer soon, hopefully!
Regards
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Tamiya 1:35 35197 Stug III G
Really depends on which one it is and how much you have to pay for it.I think I need to build a Dragon Stug III G to figure out if an over engineered kit is worth the effort
The original Ausf. G was a very nice kit and mostly correct, some others are decent as well, especially the "Late Production Dec. 1944" kit offers pretty much anything you could need to build a final or very late pattern StuG G. I think it has a cheat sheets in the StuG build blog and I'm fairly certain I made a fake WH pattern document with the cheat sheet content. Just drop me a line if you want any of these, I think I made two or three, and will make more when I build more StuGs again.
However the most versatile, if somewhat erratic, kit is the "Black Knights" StuG if you ignore the fact that it's a tie-in for a manga and the decals are entirely useless. It offers a lot of options for a mid. production StuG with 8cm front plate. The annoying/awesome (depending on how much you like research) thing of course is that you really need to do research (or for that matter have Müller and ZImmermann at hand, which I happen to know you have ) for any of the mid. types because the "vanilla" one is a moderately unlikely "generic" vehicle.
Hope this was helpful - the Bronco StuGs are also great, if a bit closely related to the old Dragon kits of the 90s, they might be a nice alternative, depending on how many other Ausführungen they intend to do...
Still going through suspicious boxes in search of the bloody waffle pattern stamp... I'm really bummed that I can't seem find it.
Best regards
Raoul G. Kunz
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Tamiya 1:35 35197 Stug III G
All cheat sheets are more than welcome Raoul,
And will be both greatly appreciated and well used too!
I still get confused when trying to match a kit to the plans and references,
Especially with the more intricate variations of the G's during their production runs.
I think I shall try to hop between a resurrection of the alternative Stug III A and one of the many 10.5's with such a rich range of field mods
Time to get back on the Stug III "horse" Raoul
Rattle can primer and we might just get this one to the finish line,
and I will try to finish the 2 figures too, sadly I don't think a cat could replace the dog
Steve H
And will be both greatly appreciated and well used too!
I still get confused when trying to match a kit to the plans and references,
Especially with the more intricate variations of the G's during their production runs.
I think I shall try to hop between a resurrection of the alternative Stug III A and one of the many 10.5's with such a rich range of field mods
Time to get back on the Stug III "horse" Raoul
Rattle can primer and we might just get this one to the finish line,
and I will try to finish the 2 figures too, sadly I don't think a cat could replace the dog
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Vincent Power
- Senior Site Contributor.....
- Posts: 2634
- Joined: 31 Jul 2014, 23:49
- Location: Melbourne Australia
Re: Tamiya 1:35 35197 Stug III G
Excellent work Steve. This has turned out very nicely indeed.
Vincent
Vincent
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Tamiya 1:35 35197 Stug III G
Thanks Vincent
A truly shake and bake it, great to try some paint effects on
Let see
More soon?
Steve H
A truly shake and bake it, great to try some paint effects on
Let see
More soon?
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns: