Hobby Boss VK4502(P)

2018 Assault & Heav Tank Group Build. Campaign runs from 01/01/18 - to 31/12/18. Campaign medals awarded for models completed within those dates.
User avatar
Philipp Gross
Site Admin/Founder
Posts: 5122
Joined: 19 Jul 2014, 23:40
Location: Frankfurt
Contact:

Hobby Boss VK4502(P)

Post by Philipp Gross »

No guarantees that this will go anywhere until the year is over, but here we go again :roll:

The VK4502(P) was Ferdinand Porsche's contribution to the Tiger II programme. Basically he took the rejected VK4501(P) and added sloped armour as well as a new turret for the 8.8 cm L/71 gun. Just like before, the Henschel design won. And just like before, Porsche had ordered parts to be made because of course this time his tank has to win! Thus we ended up with what is today often called the "Porsche Turret" on the first 50 Henschel King Tigers.

I'm using the Hobby Boss kit, because the Dragon/Cyber-Hobby kit is both worse and absurdly expensive for what you get. It does have a minor flaw however, which is the lack of fenders/mudguards. Thankfully Voyager has released a set:
Image

My goal is to make an alternate history version of the initial production King Tigers that were issued to Funklenk-Panzerkompanie 316 and used for a brief time in France before all were lost to technical problems:
Image

I started last night, here's where I am right now.
Image

The Voyager fenders have excellent detail, but for the sake of mental health I will build it with some segments lost or damaged:
Image

If this tank had actually been built and sent into battle, it would have had Zimmerit, which will come next.

Philipp
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImage

User avatar
Raoul Kunz
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1655
Joined: 20 Jul 2014, 01:16
Location: Karben, next to Frankfurt, HRE

Re: Hobby Boss VK4502(P)

Post by Raoul Kunz »

The fenders look great on this oh-so-VERY-Dr.Ing.Ferdinand-Porsche-design ;) .

This is another of his petrol-electric monstrosities, isn't it? :roll:

Oh Dr. Porsche and weapons design... :roll: :lol: it's really something you'd expect from HYDRA (HAIL HYDRA! :roll: :lol: )... :lol:


Best regards

Raoul G. Kunz
~fiat iustitia aut pereat mundus~

Completed Campaigns:
ImageImageImageImageImageImageImageImage

User avatar
Philipp Gross
Site Admin/Founder
Posts: 5122
Joined: 19 Jul 2014, 23:40
Location: Frankfurt
Contact:

Re: Hobby Boss VK4502(P)

Post by Philipp Gross »

Yep, this is exactly the same as his last proposal except for the armour layout. Who could have thought an electric transmission using tons of war-critical copper would be a bad idea? :roll:

Philipp
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImage

User avatar
Steve Hutchinson
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 2263
Joined: 20 Jul 2014, 08:27
Location: Bradford West Yorkshire, UK

Re: Hobby Boss VK4502(P)

Post by Steve Hutchinson »

Nice one Philipp

I have the Hintern and the Vorne in the stash

Those Voyager fenders do look good

Should be an interesting build.

Can we have some more? when you are ready

Regards

Steve H
""I need to be creative, to feel ALIVE!""

Completed Campaigns:
ImageImageImageImageImageImageImage

Adam Durrant
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1791
Joined: 22 Apr 2016, 05:41
Location: Auckland, NZ

Re: Hobby Boss VK4502(P)

Post by Adam Durrant »

The spring on the rear fender has come up beautifully, wish I could make 'em look so good!

Adam
I'm a serial kit starter....
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage

User avatar
Philipp Gross
Site Admin/Founder
Posts: 5122
Joined: 19 Jul 2014, 23:40
Location: Frankfurt
Contact:

Re: Hobby Boss VK4502(P)

Post by Philipp Gross »

Thanks gents! :)
Steve Hutchinson wrote: 17 Nov 2018, 21:16 I have the Hintern and the Vorne in the stash
Careful there - "hinten" means rear in general, but "Hintern" means the rear end of a person. Hobby Boss got that mixed up :lol:
Adam Durrant wrote: 17 Nov 2018, 23:22 The spring on the rear fender has come up beautifully, wish I could make 'em look so good!
Thanks Adam! :) Though I can't take any credit for that, Voyager provides the finished springs with the set. These are "real" springs and probably sourced from some external supplier for watch parts or whatever else needs miniature springs.

Well, time to grab the Zimmerit rake...

Philipp
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImage

User avatar
Steve Hutchinson
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 2263
Joined: 20 Jul 2014, 08:27
Location: Bradford West Yorkshire, UK

Re: Hobby Boss VK4502(P)

Post by Steve Hutchinson »

Philipp Gross wrote: 18 Nov 2018, 19:23 Careful there - "hinten" means rear in general, but "Hintern" means the rear end of a person. Hobby Boss got that mixed up :lol:
Opps

I guess it could be an ar*e, butt, bum, backside, booty, buttock, VK4502(P) alternative Porsche Royal Tiger II ;)

I guess the German Chinese translator had a bad day or it was his junior that finished the work?

Looking forward to this one being built

Regards

Steve H
""I need to be creative, to feel ALIVE!""

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Bryan Krueger
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 902
Joined: 18 Feb 2015, 03:35
Location: Colorado
Contact:

Re: Hobby Boss VK4502(P)

Post by Bryan Krueger »

Interesting project. Will look col with zimm. Nice work on the fender so far.
AKA Maschinen Krueger

Completed Campaigns:
ImageImageImageImage

User avatar
Philipp Gross
Site Admin/Founder
Posts: 5122
Joined: 19 Jul 2014, 23:40
Location: Frankfurt
Contact:

Re: Hobby Boss VK4502(P)

Post by Philipp Gross »

Thanks again everyone :)

Zimmerit is on:
Image
Image
Image
(oops, forgot the rear plate)

As before with the Tiger I I've used Vallejo putty and etched rake tools that came with the Tiger. It's very quick and completely foolproof. If you're not happy with the result, just rub it off and start again.

Philipp
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImage

User avatar
Bryan Krueger
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 902
Joined: 18 Feb 2015, 03:35
Location: Colorado
Contact:

Re: Hobby Boss VK4502(P)

Post by Bryan Krueger »

Nice zimm. It looks scale thick.

Which kit had the rake tools?
AKA Maschinen Krueger

Completed Campaigns:
ImageImageImageImage

Post Reply