I've just got another face painting set Steve, the colours are a bit more "flesh" than the red brown of the AK set. Scrubbed the faces with IPA and re-undercoated in Chaos Black. I'll have another crack over the next few weeks.
No more progress on the base, have run out of "water". Not a lot to photograph on this build at present, so nothing for a while whilst I await a delivery from BNA. Have flipped back to the engineer GB!
Adam
Joy Ridin'
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Joy Ridin'
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Joy Ridin'
Looks like this ones on hold for a while. Ordered more AK "water" and a few other bits and pieces from BNA a week ago. parecel has been delivered...back to BNA. I've been told that Aus Post is having "issues" with its tracking system and despite the item being "returned to sender" BNA report they haven't received it. Luckily it was insured..
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
- Vincent Power
- Senior Site Contributor.....
- Posts: 2641
- Joined: 31 Jul 2014, 23:49
- Location: Melbourne Australia
Re: Joy Ridin'
Sorry to hear that Adam. I hope it sorts itself out soon and you can continue on with this build.
Vincent
Vincent
Completed Campaigns:
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Joy Ridin'
BNA order finally turned up! The issue was with the magnifying visor I had ordered which has an LED head light. The batteries are lithium and so had to be removed before AusPost would ship
More acrylic water was in the order so the "swimming pool" around the wee Schwimmwagen is filling up 3mm at a time.
Might have to find where I put the hornet heads for the figures somewhere in the clutter of the Chata P build and when I get back from the US have another crack at face painting
More acrylic water was in the order so the "swimming pool" around the wee Schwimmwagen is filling up 3mm at a time.
Might have to find where I put the hornet heads for the figures somewhere in the clutter of the Chata P build and when I get back from the US have another crack at face painting
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Joy Ridin'
Finally managed to fill the "pool"...3mm at a time!
I tinted the lower levels to simulate a muddy pond/river. I left the upper layers clear so that a bit of the model is visible. Problem now is that I'll add some ripples/bow wave etc and it will all disappear again!
Next time round I'll cut the bottom of the model off and do a "waterline" like the boat builders do
I tinted the lower levels to simulate a muddy pond/river. I left the upper layers clear so that a bit of the model is visible. Problem now is that I'll add some ripples/bow wave etc and it will all disappear again!
Next time round I'll cut the bottom of the model off and do a "waterline" like the boat builders do
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
- Vincent Power
- Senior Site Contributor.....
- Posts: 2641
- Joined: 31 Jul 2014, 23:49
- Location: Melbourne Australia
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Joy Ridin'
Got going over the last week with the AK Diorama "water effects" and "foam" sets. Looks OK to me, just need to suck it up and paint the figures now!
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns: