ShM-120 PRAM

2017 Self-Propelled Artillery Group Build. Campaign runs from 01/01/17 - to 30/06/17. Campaign medals awarded for models completed within those dates.
User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

ShM-120 PRAM

Post by Olivier Carneau »

Hi all,
ready for a new start in 2017. My entry in the campaign is a rare variant of the BMP named ShM-120 PRAM which was in service with the Czechoslovak army then the Czech and Slovak ones after the separation.

The resin kit (with some PE bits) was produced by Panzershop and is now out of production.

It comes in a large cardboard box with foam chips and bubble wrap plastic to protect the parts but you will see that it was not sufficient. As usual with Panzershop, you have some highs and some lows. The lows are the number of recast parts from the Dragon BMP, even some wrong ones like the sprockets and the lack of details in some areas. The highs are some very fine original parts and an original model.

As the sprockets are wrong, I decided to use the Master Club indy links tracks which come with the new type of sprocket. I jsut fear that there will be not enough links to complete the extended runs so I'll save some Panzershop links for the less visible areas.

I don't know if I'll start gluing parts on 1st January but for sure I'll have to repair the broken parts. See the picture. The kit hull also has 4 roadwheel mounting pins broken and one simply missing. A bit of clean up is required as with every resin kit.

Some pictures
The box
Image

The instructions!
Image

Image

The broken parts
Image

Apart from these annoying things, the kit is sometimes simplified in some areas and will need a bit of detailing. So wish me luck :lol:
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Philipp Gross
Site Admin/Founder
Posts: 5122
Joined: 19 Jul 2014, 23:40
Location: Frankfurt
Contact:

Re: ShM-120 PRAM

Post by Philipp Gross »

Good luck, you'll need it :lol:

If Gary were still among us he'd build the kit by replacing 90% of it with brass and sheet styrene :P

Philipp
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImage

Adam Durrant
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1791
Joined: 22 Apr 2016, 05:41
Location: Auckland, NZ

Re: ShM-120 PRAM

Post by Adam Durrant »

Pity about the broken parts Olivier, it looks like it's going to take a bit of work to join that top deck and rescribe the panel lines. Very unusual and interesting subject, will follow your build with interest as I've never attempted a purely rein kit :D
I'm a serial kit starter....
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage

User avatar
Vincent Power
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 2634
Joined: 31 Jul 2014, 23:49
Location: Melbourne Australia

Re: ShM-120 PRAM

Post by Vincent Power »

Good luck with this kit Olivier. I've never built a resin kit and those broken pieces would be too much for me. :shock:

Cheers,
Completed Campaigns:
ImageImageImageImageImageImageImageImage

User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: ShM-120 PRAM

Post by Olivier Carneau »

Don't worry about the broken parts. The break is "clean" so it should not be too hard to fix the parts.
I'll start this build by repairing the parts, pictures soon ;)
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Steve Hutchinson
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 2263
Joined: 20 Jul 2014, 08:27
Location: Bradford West Yorkshire, UK

Re: ShM-120 PRAM

Post by Steve Hutchinson »

Don't envy you starting with a repair Olivier :evil:

I am sure it wont hold you up for too long ;)

Interesting subject too :D

regards

Steve H
""I need to be creative, to feel ALIVE!""

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: ShM-120 PRAM

Post by Olivier Carneau »

Steve Hutchinson wrote:Don't envy you starting with a repair Olivier :evil:

I am sure it wont hold you up for too long ;)

Interesting subject too :D

regards

Steve H
You're right Steve but the worst is not the breaks which are already fixed but breaks in the molds which caused resin leakage on a great number of parts creating large mold seams.
I'll try to do my best with thisk it. Fortunately I got it cheap :D
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: ShM-120 PRAM

Post by Olivier Carneau »

Well,
it's time to start this build. As I previoulsy wrote I first had to glue the broken parts. So nothing amazing so far :lol:
One roadwheel pin is still missing. I'll have to make one when time comes. As you may notice, the lower hull is a recast of the Dragon hull which has been extended.
Some glue spots need some sanding too. A couple of air bubbles have to be filled.

Image

Image
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Philipp Gross
Site Admin/Founder
Posts: 5122
Joined: 19 Jul 2014, 23:40
Location: Frankfurt
Contact:

Re: ShM-120 PRAM

Post by Philipp Gross »

Good thing these broke so clean!

I guess taking the mortar parts and mounting them on a new BMP kit wouldn't be much easier?

Philipp
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImage

User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: ShM-120 PRAM

Post by Olivier Carneau »

Philipp Gross wrote:I guess taking the mortar parts and mounting them on a new BMP kit wouldn't be much easier?
Philipp
Nope, because Panzershop didn't simply recast Dragon parts, they also fixed mistakes of the original kit. Look at the access hatch right of the driver hatch. On the original kit, it was mis-placed by Dragon.

In fact, I am more worried about the sturdiness of the roadwheel arms and their capacity to support the weight of the resin hull.
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

Post Reply