Construction is mostly complete so time for some paint.
First up I put some primer on, Vallejo Black and Light gray
- jeep paint.jpg (99.65 KiB) Viewed 2276 times
For the Olive Drab, I used the AMMO Modulation set. The paint is nice and easy to use but I was disappointed with the highlight colours. The picture on the packet bears no resemblance to the actual colours in the pack. The lightest highlight shade is barely different from the previous colour, unfortunately.
Anyway, on with the show.
Over the primer, I sprayed very light coats of the Dark Base. I gave the chassis and the underside of the body a light coat as nobody will see there and it will be covered with dirt anyway. However, inside the body I gave the floor a good covering.
- jeep paint dark.jpg (91.99 KiB) Viewed 2276 times
Next, I used the Olive Drab Base. This colour is the one that anchors the highlight shades.......normally that is.
- jeep paint base.jpg (85.56 KiB) Viewed 2276 times
The Light Base colour is designed for the most exposed areas which in this case are the fenders and bonnet. I also gave the storage bins in the back a coat as well.
- jeep paint light.jpg (83.61 KiB) Viewed 2276 times
Finally, I added the light Highlights. This is where the lack of contrast was a real letdown.
So much so that I forgot to take pics like the previous sets.
You can see how the "highlight" is basically the same shade as the previous coat. By the way, the Jeep isn't glued together here, it's just dry fitted.
- jeep paint highlights.jpg (65.14 KiB) Viewed 2276 times
I'm tempted to mix my own highlight and add that. Lots of detail painting to be done yet.
Thanks for watching.
Cheers,
Vincent