Sd.Kfz 222
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Sd.Kfz 222
Wow, great job on the detailing with the etched parts - I'm currently building some of their equivalent contraptions in ultra-fine-little-fiddly-limit-of-the-medium-plastic parts for the 231 and I have to say: etch would probably have been a better solution .
Also great job on the gun combo... it seems somehow strangely familiar - I didn't know the kit had a turned barrel for the 2cm KwK, I wouldn't have suggested getting a barrel .
Best regards
Raoul G. Kunz
Also great job on the gun combo... it seems somehow strangely familiar - I didn't know the kit had a turned barrel for the 2cm KwK, I wouldn't have suggested getting a barrel .
Best regards
Raoul G. Kunz
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Sd.Kfz 222
Thanks for the support guys.
I finally bought one of those sticky pick up pencil things for holding/positioning small parts. Still peeling CA off my fingers but it is a big help for managing small parts
How do you guys apply superglue? I've been making a little puddle on the back of the old CD I use to cut PE on. I then apply with a sharp toothpick to an edge and use capillary action. Nine times out of ten I will still glue my tweezers or fingers to the model as well
Looking forward to the 70s build, no stress, no need to be 100% accurate, gluey finger marks all over the model, ahh the old days!
I finally bought one of those sticky pick up pencil things for holding/positioning small parts. Still peeling CA off my fingers but it is a big help for managing small parts
How do you guys apply superglue? I've been making a little puddle on the back of the old CD I use to cut PE on. I then apply with a sharp toothpick to an edge and use capillary action. Nine times out of ten I will still glue my tweezers or fingers to the model as well
Looking forward to the 70s build, no stress, no need to be 100% accurate, gluey finger marks all over the model, ahh the old days!
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
Re: Sd.Kfz 222
I'm also using a toothpick...and a little puddle on a sheet of cardboard. But I'm also not very good with photoetch
Philipp
Philipp
Completed Campaigns:
- Steve Hutchinson
- Senior Site Contributor.....
- Posts: 2263
- Joined: 20 Jul 2014, 08:27
- Location: Bradford West Yorkshire, UK
Re: Sd.Kfz 222
Hi Adam
An old Humbrol paint tin , a little foil over the top and you have a small puddle to dip a sharpened tooth pick or cocktail stick into,
along with another one with accelerator in and a blunted cocktail stick, so you can get a nice sized drip to put on the super glue to harden it quickly.
Got that from Adam Wilder's PE DVD, works well too
Steve H
An old Humbrol paint tin , a little foil over the top and you have a small puddle to dip a sharpened tooth pick or cocktail stick into,
along with another one with accelerator in and a blunted cocktail stick, so you can get a nice sized drip to put on the super glue to harden it quickly.
Got that from Adam Wilder's PE DVD, works well too
Steve H
""I need to be creative, to feel ALIVE!""
Completed Campaigns:
Completed Campaigns:
- Raoul Kunz
- Senior Site Contributor.....
- Posts: 1655
- Joined: 20 Jul 2014, 01:16
- Location: Karben, next to Frankfurt, HRE
Re: Sd.Kfz 222
*subtly taking notes*
Up until now my "method" of choice was gel consistency glue applied with a toothpick or any other one way device of similar size .
I find that you can work much better with the gel glue... but that's just me .
Best regards
Raoul G. Kunz
Up until now my "method" of choice was gel consistency glue applied with a toothpick or any other one way device of similar size .
I find that you can work much better with the gel glue... but that's just me .
Best regards
Raoul G. Kunz
~fiat iustitia aut pereat mundus~
Completed Campaigns:
Completed Campaigns:
- Vlad Seabrook-Smith
- Posts: 615
- Joined: 19 Jul 2014, 22:57
Re: Sd.Kfz 222
Liking this Adam, your updates have improved the overall appearance nicely, the gun assembly is the puppies
For such an old kit it holds itself well, have you tried one of the Hobbyboss releases?
For such an old kit it holds itself well, have you tried one of the Hobbyboss releases?
Completed Campaigns:
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Sd.Kfz 222
Just getting back into modelling after a 25+yr hiatus, so far have only built a couple of Tamiya kits (Panther G and Panzer II), a Meng (Whippet) and an AFV Club (Shot-Kal). So many more brands than when I first modelled! However I do have a HobbyBoss M706 Commando in my "new" stash!Vlad Seabrook-Smith wrote:Liking this Adam, your updates have improved the overall appearance nicely, the gun assembly is the puppies
For such an old kit it holds itself well, have you tried one of the Hobbyboss releases?
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
- Rob Matthews
- Moderator
- Posts: 1202
- Joined: 20 Jul 2014, 00:06
- Location: Wiltshire UK
- Contact:
Re: Sd.Kfz 222
Adam - You've transformed this kit - Lovely job - the gun assembly looks fab.
FWIW - I use a cocktail stick having placed some Superglue GEL on old credit cards - I keep a stash.
Keep it coming
Rob
FWIW - I use a cocktail stick having placed some Superglue GEL on old credit cards - I keep a stash.
Keep it coming
Rob
Modelling the mundane
Completed Campaigns:
Completed Campaigns:
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Sd.Kfz 222
At the rate I'm buying kits and modeling toys online I'll have a stash of melted or cut-up credit cards pretty soonRob Matthews wrote:Adam - You've transformed this kit - Lovely job - the gun assembly looks fab.
FWIW - I use a cocktail stick having placed some Superglue GEL on old credit cards - I keep a stash.
Keep it coming
Rob
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns:
-
- Senior Site Contributor.....
- Posts: 1791
- Joined: 22 Apr 2016, 05:41
- Location: Auckland, NZ
Re: Sd.Kfz 222
Back to work on the 222 after the flurry of activity on the 70's build. Finished the kit, ready for primer. Just fiddling with stowage at this stage. This is what I have come up with so far, just bluetak to hold in place currently. Pretty much followed the pic on the Legend box. Any suggestions??
I'm a serial kit starter....
Completed Campaigns:
Completed Campaigns: