KV-1 Ehkranami (Trumpeter)
- Greg Beckman
- Site Contributor..
- Posts: 697
- Joined: 19 Jul 2014, 23:02
- Location: Austin, TX.....Republic of Texas.
KV-1 Ehkranami (Trumpeter)
KV-1 with screens and an old Warriors resin figure is my next project. I have built about 2 or 3 of these Trumpeter KV kits and I am always pleased when I start a Trumpy KV kit up as they are just so darn easy to put together as there engineering standard is high, very Tamiya like. I built this same KV variant years ago when Tamiya put it out. I can already see that this newer one is light years ahead of that old Tamiya kit, so I am very much looking forward to this build.
Last edited by Greg Beckman on 18 Nov 2014, 21:10, edited 2 times in total.
Gregovich (Greg)
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
Re: KV-1 Ehkranami (Trumpeter)
Nice one Greg! I fully agree with you on these kits....absolutely marvellous to put together and dirt cheap too. There's a reason this exists
Philipp
Philipp
Completed Campaigns:
- Greg Beckman
- Site Contributor..
- Posts: 697
- Joined: 19 Jul 2014, 23:02
- Location: Austin, TX.....Republic of Texas.
Re: KV-1 Ehkranami (Trumpeter)
The hull is mostly done. Just need to wrap up the fenders and chassis components and it will be on to the turret. Note spaced armor on the hull side and additional armour on the upper and lower hull front.
Gregovich (Greg)
- Mark Aldrich
- Senior Site Contributor.....
- Posts: 1227
- Joined: 21 Aug 2014, 21:13
- Location: Puyallup, WA
Re: KV-1 Ehkranami (Trumpeter)
What a monster!
Cry Havoc and let slip the Dogs of War
TreadHead is NOT an ugly word
Completed Campaigns:
TreadHead is NOT an ugly word
Completed Campaigns:
- Greg Beckman
- Site Contributor..
- Posts: 697
- Joined: 19 Jul 2014, 23:02
- Location: Austin, TX.....Republic of Texas.
Re: KV-1 Ehkranami (Trumpeter)
The Monster continues. Still a few things to complete before paint. I also found a turned barrel in my parts box.
Gregovich (Greg)
- Greg Beckman
- Site Contributor..
- Posts: 697
- Joined: 19 Jul 2014, 23:02
- Location: Austin, TX.....Republic of Texas.
Re: KV-1 Ehkranami (Trumpeter)
Gregovich (Greg)
- Shawn Ramsey
- Senior Site Contributor.....
- Posts: 1987
- Joined: 20 Jul 2014, 00:26
Re: KV-1 Ehkranami (Trumpeter)
Four days later and your almost done.
I really wish I had motivation like you do when it comes to building. I go days and days with out touching any thing.
Shawn
I really wish I had motivation like you do when it comes to building. I go days and days with out touching any thing.
Shawn
Completed Campaigns:
- Greg Beckman
- Site Contributor..
- Posts: 697
- Joined: 19 Jul 2014, 23:02
- Location: Austin, TX.....Republic of Texas.
Re: KV-1 Ehkranami (Trumpeter)
Shawn.....it's because you build non-Russian stuff...
Some progress. Most of the weathering is complete. Need to dress up the towing cable and dust it some. I used the new Ammo metal wax(iron color) on the idlers and metal roadwheels as an experiment.....eee....a little too bright. I will dust them up some to take the shine down some.
Chipping and tracks are up next.
Some progress. Most of the weathering is complete. Need to dress up the towing cable and dust it some. I used the new Ammo metal wax(iron color) on the idlers and metal roadwheels as an experiment.....eee....a little too bright. I will dust them up some to take the shine down some.
Chipping and tracks are up next.
Gregovich (Greg)
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
Re: KV-1 Ehkranami (Trumpeter)
You're faster than the entire Chelyabinsk factory
Philipp
Philipp
Completed Campaigns:
- Vincent Power
- Senior Site Contributor.....
- Posts: 2641
- Joined: 31 Jul 2014, 23:49
- Location: Melbourne Australia
Re: KV-1 Ehkranami (Trumpeter)
Great job on the build Greg. I especially like the mud effect you have there. Really nice.
Cheers,
Vincent
Cheers,
Vincent
Completed Campaigns: