Kinetic Canadian RG31 mk3 with RWS

The place to show your latest build taking place whether it be a blog or WIP.
User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: Kinetic Canadian RG31 mk3 with RWS

Post by Olivier Carneau »

Vincent Power wrote: 05 Sep 2020, 01:26 Nice Olivier, it's coming along quickly. :) What do you think of the kit so far?
Vincent
Thank you Vincent. Till yesterday I would have said the kit is not perfect but it is buildable. Today I encounter some disappointment. I intended to close the rear door. This is impossible without some heavy surgery to the door itself or the rear plate. It is far easier to let it open. I had to fill some heat sinks which was time consuming. I will have to modify some parts because of poor fit. Fortunately all this is just time consuming like decyphering the instructions in some steps. At one step Kinetic show a drawing of the Canadian RG31 and the next step you have a drawing of the US RG31 without the Canadian specific parts. This does not help place some parts. :)
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

Adam Durrant
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1791
Joined: 22 Apr 2016, 05:41
Location: Auckland, NZ

Re: Kinetic Canadian RG31 mk3 with RWS

Post by Adam Durrant »

I gave up on building a Kenetic plane kit recently because the instructions were so poor and parts depicted were not actually included...I feel your pain :(
I'm a serial kit starter....
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage

User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: Kinetic Canadian RG31 mk3 with RWS

Post by Olivier Carneau »

Despite the kit inaccuracies and the vague instructions I managed to do some progress. The RWS is not glued yet. I'm not happy with it and I'm hesitating to buy a better one by AFV Club. Will see. I'm not sure this kit deserves more money.

Image

Image

Image
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Shawn Ramsey
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1987
Joined: 20 Jul 2014, 00:26

Re: Kinetic Canadian RG31 mk3 with RWS

Post by Shawn Ramsey »

With the technology available today there is no excuse for poor fitting kits. You have been a trooper though proceeding with the build. I would have probably given up by now. Have fun paining it. :D

Shawn
Completed Campaigns:
ImageImage

User avatar
Philipp Gross
Site Admin/Founder
Posts: 5122
Joined: 19 Jul 2014, 23:40
Location: Frankfurt
Contact:

Re: Kinetic Canadian RG31 mk3 with RWS

Post by Philipp Gross »

It certainly looks good despite your struggles. I'd say don't give up yet :)

Philipp
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImage

User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: Kinetic Canadian RG31 mk3 with RWS

Post by Olivier Carneau »

No way that I give up Philipp :lol:

Here is where I'm right now. The base paint is on, some details are painted as well. I still need to glue the PE lights protections. Then I'll shift to the decal application followed by the weathering.

Image

Image

Image

Image
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: Kinetic Canadian RG31 mk3 with RWS

Post by Olivier Carneau »

I applied the decals today. The good point is Kinetic give some stencils.
The bad points are vague instructions, some too large decals nearly useless, one of the large heads is missing (according to the instructions you need four large and one small while you get three large only and two small).

Image

Image

Image

Image

I intended to use a C6 to replace the kit poor M2 HMG but the right cradle is missing. I need to source a correct M2 to put on the RWS. Concerning the antennas, according to the instructions, the vehicle depicted only has the antennas on the roof T brackets.
I'd like to add some water cans and fuel cans in the right side stowage shelf. Can I use US models? The only "Canadian" ones I have are the odd two handles type and other with straps.

Olivier
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: Kinetic Canadian RG31 mk3 with RWS

Post by Olivier Carneau »

The end is close. I need to add the MG. Unfortunately I don't have anything better than the kit one. I have a couple of MAG but would need an adaptor to put it on the RWS.
I'll try to add the cables to the antennas too.


Image

Image

Image

Image

Olivier
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Shawn Ramsey
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1987
Joined: 20 Jul 2014, 00:26

Re: Kinetic Canadian RG31 mk3 with RWS

Post by Shawn Ramsey »

That looks great. Does it transform into an Autobot 8-)

Shawn
Completed Campaigns:
ImageImage

User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: Kinetic Canadian RG31 mk3 with RWS

Post by Olivier Carneau »

Shawn Ramsey wrote: 13 Sep 2020, 20:06 That looks great. Does it transform into an Autobot 8-)

Shawn
Not enough familiar with that to answer Shawn. Maybe a Canadian member could say it. :D
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

Post Reply