Kurganets 25 APC

The place to show your latest build taking place whether it be a blog or WIP.
User avatar
Bryan Krueger
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 904
Joined: 18 Feb 2015, 03:35
Location: Colorado
Contact:

Re: Kurganets 25 APC

Post by Bryan Krueger »

Adam Durrant wrote: 17 Jan 2018, 00:13 I’ve got the 30mm version in the stash, someone in the “Abrams Squad” mag did a build and the hull had some serious warpage and sink marks but came together nicely with glue and major clampage!
Adam - There is a review on The Modelling News that had the same problem.
AKA Maschinen Krueger

Completed Campaigns:
ImageImageImageImage

User avatar
Bryan Krueger
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 904
Joined: 18 Feb 2015, 03:35
Location: Colorado
Contact:

Re: Kurganets 25 APC

Post by Bryan Krueger »

WoooHooo! Finally making progress on this kit. The base color is AK Real Colors modern Russian Green. I used an oil dot filter to add some variety and a black-green oil wash for the first wash.


Image



Image


Do these twin boxes on the upper corners cover the exhausts?
Image


Does anyone know which one is the fuel fill port?
Image
AKA Maschinen Krueger

Completed Campaigns:
ImageImageImageImage

User avatar
Raoul Kunz
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1655
Joined: 20 Jul 2014, 01:16
Location: Karben, next to Frankfurt, HRE

Re: Kurganets 25 APC

Post by Raoul Kunz »

Very nice, once again one of "those" vehicles, you know, the ones that look like late 80s sci-fi? :mrgreen:

The filter and oils look really good... in fact it's another of the "Bryan-Builds" that initially looks like extremely well done CG! :shock:


Best regards

Raoul G. Kunz
~fiat iustitia aut pereat mundus~

Completed Campaigns:
ImageImageImageImageImageImageImageImage

User avatar
Olivier Carneau
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1178
Joined: 24 Jul 2014, 09:40
Location: Corrèze, Southern France
Contact:

Re: Kurganets 25 APC

Post by Olivier Carneau »

Really nice paint job so far. And sorry, I can't answer any of your questions ;)
Olivier
http://olivier.carneau.free.fr

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Bryan Krueger
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 904
Joined: 18 Feb 2015, 03:35
Location: Colorado
Contact:

Re: Kurganets 25 APC

Post by Bryan Krueger »

Thanks Oliver and Raoul.

I've started dust and rain marks. First layer of dust and streaks are created by airbrushing AK Light Dust enamel and then swiping the enamel with a ratty brush just damp with thinner. Pigments have been applied to the lower hull and running gear. Additional dust effects created with oil paints. I need to bring some of the lower darker colors up the hull sides next.

Wheels are not fully attached so there may be some alignment issues.

Image

Image

Image

Image
AKA Maschinen Krueger

Completed Campaigns:
ImageImageImageImage

User avatar
Steve Hutchinson
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 2263
Joined: 20 Jul 2014, 08:27
Location: Bradford West Yorkshire, UK

Re: Kurganets 25 APC

Post by Steve Hutchinson »

super effects Bryan

never thought of using an AB for a full vehicle dust over, but it does look very realistic :D

Looks like fun too

Enjoy the next stage

regards

Steve H
""I need to be creative, to feel ALIVE!""

Completed Campaigns:
ImageImageImageImageImageImageImage

User avatar
Bryan Krueger
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 904
Joined: 18 Feb 2015, 03:35
Location: Colorado
Contact:

Re: Kurganets 25 APC

Post by Bryan Krueger »

Thanks Steve. I was a little nervous about how it was going to turn out. I reworked the rear hull twice and am still not totally happy with it.
AKA Maschinen Krueger

Completed Campaigns:
ImageImageImageImage

User avatar
Vincent Power
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 2640
Joined: 31 Jul 2014, 23:49
Location: Melbourne Australia

Re: Kurganets 25 APC

Post by Vincent Power »

Don't be too hard on yourself Bryan, the dust effects look superb. :)

Vincent
Completed Campaigns:
ImageImageImageImageImageImageImageImage

User avatar
Bryan Krueger
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 904
Joined: 18 Feb 2015, 03:35
Location: Colorado
Contact:

Re: Kurganets 25 APC

Post by Bryan Krueger »

Thanks Vincent!
AKA Maschinen Krueger

Completed Campaigns:
ImageImageImageImage

Adam Durrant
Senior Site Contributor.....
Senior Site Contributor.....
Posts: 1791
Joined: 22 Apr 2016, 05:41
Location: Auckland, NZ

Re: Kurganets 25 APC

Post by Adam Durrant »

...did you ever work out where the fuel fill port is?
I'm a serial kit starter....
Completed Campaigns:
ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage

Post Reply